5.1 Speaker System Flush Mount 5 Speaker Set and 6" Powered Sub

Product Description

Acoustic Audio by Goldwood HT-55 Flush Mount 5 Speaker Set and Powered Subwoofer
Center Channel with Front and Rear, Right and Left home theater configuration
Traditional Passive speaker design, drive power from your home audio receiver

3 Pcs of IW191 In Wall Wired Speakers
5.25" High Rigidity Polypropylene cone woofers and 12mm soft dome tweeters
Frequency response is 40Hz-22 kHz with 97dB at 8ohm
Fits hole size of 6.25" x 9.5" with 3" depth and Spring Loaded raw wire connections

2 Pcs of R191 In Ceiling Wired Speakers
5.25" High Rigidity Polypropylene cone woofers and 12mm soft dome tweeters
Frequency response is 45Hz-22 kHz with 95dB at 8ohm
Fits hole size of 6.625" with 3" depth and raw wire clamp or solder connections
Pressure Lock Mounting System clamps tight to drywall with No Hardware Needed
Durable ABS Housings and Removeable Grills are paintable

Acoustic Audio PSW-6 Home Theater Powered Subwoofer
RCA inputs easily connect to your home theater receivers dedicated Sub Out
Integrated High Efficiency Power Amplifier with 250 watts peak power
Frequency response of 30 - 250 Hz with 96dB at 8ohm
6.5" Down Firing long throw woofer with high rigidity PVA Treated cone
Standing sub with feet size is (H x W x D) 11.1" × 9.25" × 10.04"
This Powered Subwoofer is NOT LFE Compatible

System Requirements
Any home audio receiver or amplifier with raw speaker wire outputs and Sub Out
Your receiver power should be no less than 10 and no more than 200 watts per channel
CL3 Rated in wall certified raw speaker wire to connect your receiver to the speakers

Applications
Home Theater Surround Sound Systems
Whole House Audio Systems

What's in the boxes
5 Flush Mount Passive Speakers with Removeable Grills and Cut-Out Templates
1 Powered Subwoofer with RCA Cable
Instruction Manuals